⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Nemaha County

Nemaha County, Nebraska: well depth, water level & drilling cost

✓ 546 NeDNR records · verified 2026-10-12

72 ftmedian well depth
45 ft–138 fttypical depth range
24 ftmedian static water level
180 gpmmedian yield (306 tests)

Pull every recorded well near a Nemaha County address — $49

How deep are wells in Nemaha County, Nebraska?

The median drilled well depth in Nemaha County is 72 ft, based on 527 wells with recorded depths in the state NeDNR database. Half of all wells fall between 45 ft and 138 ft; 90% are shallower than 200 ft. Wells drilled since 2016 have a median depth of 121 ft.

How much does it cost to drill a well in Nemaha County?

Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Nemaha County?

The median static water level is 24 ft below ground surface (middle half of wells: 11 ft–47 ft), from 493 measurements.

How much water do wells in Nemaha County produce?

The median tested yield is 180 gpm (middle half: 20 gpm–500 gpm), from 306 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 167 50–100 ft 176 100–150 ft 70 150–200 ft 51 200–300 ft 57 300–400 ft 4 400–600 ft 2 600+ ft 0
Looking at a specific property in Nemaha County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Nemaha County

Free. Goes to licensed drillers working Nemaha County.

Well records by ZIP code in Nemaha County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.