⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Seward County › Milford (68405)

Milford, NE (68405): well depth, water level & drilling cost

✓ 669 NeDNR records · Seward County

110 ftmedian well depth
70 ft–141 fttypical depth range
67 ftmedian static water level
120 gpmmedian yield (442 tests)

Pull every recorded well near a Milford (68405) address — $49

How deep are wells in and around Milford (68405), Nebraska?

The median drilled well depth in and around Milford (68405) is 110 ft, based on 642 wells with recorded depths in the state NeDNR database. Half fall between 70 ft and 141 ft; 90% are shallower than 271 ft.

How much does it cost to drill a well in and around Milford (68405)?

Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milford (68405)?

The median static water level is 67 ft below ground surface (middle half of wells: 47 ft–88 ft), from 594 measurements.

Drilled depth distribution

0–50 ft 110 50–100 ft 147 100–150 ft 232 150–200 ft 16 200–300 ft 89 300–400 ft 28 400–600 ft 20 600+ ft 0
Looking at a specific property in Milford (68405)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milford (68405)

Free. Goes to licensed drillers working Seward County.

Part of Seward County well records.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.