Nebraska Well Data › Seward County › Staplehurst (68439)
Staplehurst, NE (68439): well depth, water level & drilling cost
✓ 400 NeDNR records · Seward County
Pull every recorded well near a Staplehurst (68439) address — $49
How deep are wells in and around Staplehurst (68439), Nebraska?
The median drilled well depth in and around Staplehurst (68439) is 120 ft, based on 382 wells with recorded depths in the state NeDNR database. Half fall between 60 ft and 160 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in and around Staplehurst (68439)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Staplehurst (68439)?
The median static water level is 60 ft below ground surface (middle half of wells: 22 ft–80 ft), from 363 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Seward County.
Part of Seward County well records.
Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.