⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Blaine County › Brewster (68821)

Brewster, NE (68821): well depth, water level & drilling cost

✓ 455 NeDNR records · Blaine County

120 ftmedian well depth
90 ft–179 fttypical depth range
16 ftmedian static water level
20 gpmmedian yield (307 tests)

Pull every recorded well near a Brewster (68821) address — $49

How deep are wells in and around Brewster (68821), Nebraska?

The median drilled well depth in and around Brewster (68821) is 120 ft, based on 446 wells with recorded depths in the state NeDNR database. Half fall between 90 ft and 179 ft; 90% are shallower than 314 ft.

How much does it cost to drill a well in and around Brewster (68821)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brewster (68821)?

The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–45 ft), from 425 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 124 100–150 ft 155 150–200 ft 53 200–300 ft 43 300–400 ft 45 400–600 ft 11 600+ ft 0
Looking at a specific property in Brewster (68821)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brewster (68821)

Free. Goes to licensed drillers working Blaine County.

Part of Blaine County well records.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.