Nebraska Well Data › Buffalo County › Elm Creek (68836)
Elm Creek, NE (68836): well depth, water level & drilling cost
✓ 825 NeDNR records · Buffalo County
Pull every recorded well near a Elm Creek (68836) address — $49
How deep are wells in and around Elm Creek (68836), Nebraska?
The median drilled well depth in and around Elm Creek (68836) is 186 ft, based on 783 wells with recorded depths in the state NeDNR database. Half fall between 65 ft and 279 ft; 90% are shallower than 312 ft.
How much does it cost to drill a well in and around Elm Creek (68836)?
Applying published per-foot rates to the local median depth of 186 ft: drilling and casing alone typically runs $4,650–$12,090; a complete system including pump, pressure tank, and hookup typically runs $11,160–$18,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Elm Creek (68836)?
The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–50 ft), from 738 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Buffalo County.
Part of Buffalo County well records.
Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.