Nebraska Well Data › Franklin County › Campbell (68932)
Campbell, NE (68932): well depth, water level & drilling cost
✓ 347 NeDNR records · Franklin County
Pull every recorded well near a Campbell (68932) address — $49
How deep are wells in and around Campbell (68932), Nebraska?
The median drilled well depth in and around Campbell (68932) is 200 ft, based on 334 wells with recorded depths in the state NeDNR database. Half fall between 182 ft and 220 ft; 90% are shallower than 240 ft.
How much does it cost to drill a well in and around Campbell (68932)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Campbell (68932)?
The median static water level is 130 ft below ground surface (middle half of wells: 110 ft–155 ft), from 318 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Franklin County.
Part of Franklin County well records.
Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.