⟁ Nebraska Well Data field records · 2026 survey

Nebraska Well Data › Red Willow County › Danbury (69026)

Danbury, NE (69026): well depth, water level & drilling cost

✓ 164 NeDNR records · Red Willow County

77 ftmedian well depth
53 ft–173 fttypical depth range
51 ftmedian static water level
35 gpmmedian yield (122 tests)

Pull every recorded well near a Danbury (69026) address — $49

How deep are wells in and around Danbury (69026), Nebraska?

The median drilled well depth in and around Danbury (69026) is 77 ft, based on 151 wells with recorded depths in the state NeDNR database. Half fall between 53 ft and 173 ft; 90% are shallower than 235 ft.

How much does it cost to drill a well in and around Danbury (69026)?

Applying published per-foot rates to the local median depth of 77 ft: drilling and casing alone typically runs $1,925–$5,005; a complete system including pump, pressure tank, and hookup typically runs $4,620–$7,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Danbury (69026)?

The median static water level is 51 ft below ground surface (middle half of wells: 27 ft–135 ft), from 128 measurements.

Drilled depth distribution

0–50 ft 27 50–100 ft 64 100–150 ft 15 150–200 ft 11 200–300 ft 32 300–400 ft 1 400–600 ft 0 600+ ft 1
Looking at a specific property in Danbury (69026)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Danbury (69026)

Free. Goes to licensed drillers working Red Willow County.

Part of Red Willow County well records.

Method: medians computed from NeDNR records (Nebraska DNR registered groundwater wells; decommissioned wells are excluded from the working-well counts but still counted in depth history; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.